DIP Shunt : Auto-Insert & Straight Lead
产品介紹
- Cost effective DIP shunt designed for switches with only one-time setup
- Connected terminal can be easily separated with a ball pen
- All shunts can be supplied either un-programmed or preprogrammed
- Rating......................................1A
- Insulation Resistance ...........100MΩ min at 500VD
- Dielectric Strength ............... 500VAC/ 1 minute
- Operating Temperature ..... -55°C~150°C
- Base: Thermoplatic UL 94V-0, Black
- Terminal: Copper Alloy, Pure-Tin-plated
- Tape Sealed: Polyimide film
- Hand Soldering
Soldering Iron of 30W or under at 350°C for 3 sec. max. or at 270°C for 5 sec. max. - Wave Soldering
260±5°C for 10 sec. max. - Reflow Soldering.
Peak temperature: 260°C max. The time above 255°C must be 30 sec. max.
- Tube: HTS/ HTA/ HTH
- Tape & Reel: HTS
| P/N | No. Of Pole | Dim. A | Quantity per Tube |
|---|---|---|---|
| HTS / A / H 02 | 2 | 5.08mm | 105 |
| HTS / A / H 03 | 3 | 7.62mm | 70 |
| HTS / A / H 04 | 4 | 10.16mm | 52 |
| HTS / A / H 05 | 5 | 12.70mm | 42 |
| HTS / A / H 06 | 6 | 15.24mm | 35 |
| HTS / A / H 08 | 8 | 20.32mm | 26 |
| HTS / A / H 09 | 9 | 22.86mm | 23 |
| HTS / A / H 10 | 10 | 25.40mm | 21 |
| HTS / A / H 12 | 12 | 30.48mm | 17 |
.jpg "proimages/pro/DIP-HT-01-WD_(1).jpg")
.jpg "proimages/pro/DIP-HT-01-OI_(1).jpg")
886-4-22700198
